Jobs

Transocean Job Vacancies in Nigeria, February 2014

---

Transocean is the world's largest offshore drilling contractor, provides the most versatile fleet of mobile offshore drilling units to help clients find and develop oil and natural gas reserves. Building on more than 50 years of experience with the highest specification rigs, our approximately 18,000 employees are focused on safety and premier offshore drilling performance.

We are currently recruiting for the position of:

Job Title: Asst Driller

Job ID: 2000665

Location: Lagos

Duties and Responsibilities

• Perform the drilling department's daily checklists, i.e. QHSE checks, mast/Derrick inspection, choke and kill manifold set up, etc.
• Maintain accurate records of tubular and tool dimensions (i.e. internal and external diameter, fish neck, and serial numbers) .
• Calculate ton-miles on drilling line; maintain an accurate logbook and advise the Driller on the need to slip and cut .
• Maintain an organized drilling equipment store and tubular and subs inventory .
• Maintain proper communication with the Driller, Toolpusher, and other department heads  .
• Read and interpret various gauges and meters relating to the drilling operations; assist the Driller in maintaining records and logs; .
• Actively participate in pre-tour meeting with the drilling crew for all drilling operations;.
• Assist and relieve the Driller at the Driller's console during drilling operations; .
• Assist with the preparation of equipment for impending drilling operations.
• Organize and supervise the drilling crews for all operations.
• Assist the Driller during an emergency or well control situation; assist in the well killing operations.
• Assist in supervision of Preventive Maintenance carried out on drilling equipment .
• Assist in supervision of repairs on drilling and associated equipment; .
• Assist in running and cementing casing strings, running and retrieving BOPs and risers, and other operations as directed by the Driller or Toolpusher.
• Monitor mud systems and supervise solids control equipment and mud mixing operation.
• Assist in the planning, organization and execution of rig move operations.
• Operate drilling and associated equipment as directed by the Driller, i.e. Top Drive System, mud pumps, BOP and Diverter controls, etc.

Interested and qualified candidates should:
Click here to apply online



Job Title: Sr. Subsea Mux - Nigeria Nationals

Job ID: 2000792
Location: Lagos
Reports to: The Maintenance Supervisor/Chief Engineer or Offshore Installation Manager (OIM).

Job Description

• Supervises the Subsea Supervisor, Assistant Subsea and Subsea Trainee.

Basic Function:

• Supervise the maintenance and repair of all subsea BOP and riser systems, Multiplex electro-hydraulic control systems, and all associated surface equipment and systems.

Duties and Responsibilities

Operations/Maintenance:

• Maintain the Blow Out Preventer (BOP), Diverter, and associated subsea equipment in accordance to the Preventive Maintenance System (PMS) guidelines.
• Operate and pressure test the BOP on the surface and on the seabed as required.
• Direct the deck and drill crews in the running and recovery of the BOP and Marine Riser equipment.
• Direct the assembly, installation, and nippling down the BOP and all well control equipment as required.
• Operate, maintain and repair the subsea BOP control system, i.e. surface BOP or multiplex electro-hydraulic control systems.
• Operate, maintain and test hydraulic connectors. Maintain BOP handling equipment, testing equipment and wellhead equipment.
• Operate and service the bridge cranes and related hoisting equipment. Ensure the drill string compensator is serviced as required.
• Ensure the riser pipe system is serviced and tested as required. Operate and maintain the diverter system and the running and handling tools.
• Assist in running/testing the wellhead, casing hangers and seal assemblies. Operate and maintain wellhead running/retrieval test tools.
• Ensure the required riser tensioning pressure is set to comply with the mud weight in use. Monitor and maintain the riser guideline and pod line tensioners.
• Maintain accurate daily log sheets relevant to the subsea equipment. Maintain records of BOP and associated equipment tests.
• Maintain records of inspection and certification of subsea equipment.
• Ensure an adequate supply of spares is maintained in order to fulfil maintenance requirements and facilitate a safe and efficient operation.
• Maintain records of ton-miles on wire ropes. Slip and cut according to the agreed program.
• Ensure Supervisor is informed of any issues relating to the subsea equipment, which may affect the safe and efficient running of operations.
• Ensure that the permit to work system is in place and followed.
• Liaise with the marine department prior to moving the BOP and marine riser package in lieu of the rig’s stability.
• Assist in supplying information for maintenance and repair budget.
• Assist in communicating equipment problems or breakdown with Field Support group and equipment vendor.
• Maintain the Blow Out Preventer (BOP), Diverter, and associated subsea equipment in accordance to the Preventive Maintenance System (PMS) guidelines.
• Operate and pressure test the BOP on the surface and on the seabed as required.
• Direct the deck and drill crews in the running and recovery of the BOP and Marine Riser equipment.
• Direct the assembly, installation, and nippling down the BOP and all well control equipment as required.
• Operate, maintain and repair the subsea BOP control system, i.e. surface BOP or multiplex electro-hydraulic control systems.
• Operate, maintain and test hydraulic connectors. Maintain BOP handling equipment, testing equipment and wellhead equipment.
• Operate and service the bridge cranes and related hoisting equipment. Ensure the drill string compensator is serviced as required.
• Ensure the riser pipe system is serviced and tested as required. Operate and maintain the diverter system and the running and handling tools.
• Assist in running/testing the wellhead, casing hangers and seal assemblies. Operate and maintain wellhead running/retrieval test tools.
• Ensure the required riser tensioning pressure is set to comply with the mud weight in use. Monitor and maintain the riser guideline and pod line tensioners
• Maintain accurate daily log sheets relevant to the subsea equipment. Maintain records of BOP and associated equipment tests.
• Maintain records of inspection and certification of subsea equipment.
• Ensure an adequate supply of spares is maintained in order to fulfil maintenance requirements and facilitate a safe and efficient operation.
• Maintain records of ton-miles on wire ropes. Slip and cut according to the agreed program.
• Ensure Supervisor is informed of any issues relating to the subsea equipment, which may affect the safe and efficient running of operations.
• Ensure that the permit to work system is in place and followed.
• Liaise with the marine department prior to moving the BOP and marine riser package in lieu of the rig's stability.
• Assist in supplying information for maintenance and repair budget.
• Assist in communicating equipment problems or breakdown with Field Support group and equipment vendor.

Qualification

• High school diploma or equivalent. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.
• Minimum of one year experience working with a Multiplex system.
• Valid medical examination and vaccination certificates.
• Knowledge of all technical calculations required for the subsea operation of the drilling unit and basic computer skills.

Interested and qualified candidates should:
Click here to apply online



Job Title: Driller - Nigeria Nationals

Job ID: 2000793
Location: Lagos
Reports to: The Toolpusher, Tourpusher and/or Senior Toolpusher.

Job Description

• Supervises the Assistant Driller, Derrickhand, Assistant Derrickhand, Pumphand and Floorhands.

Basic Function:

• Operate drilling equipment as instructed in the well program and Standing Instructions to Driller (SID) in a manner that complies with Company policies and procedures and the Driller's Key Responsibilities.

Duties and Responsibilities

• Operate all equipment at the Driller's console in a safe manner; maintain a clean, tidy and hazard-free condition on the drill floor and associated area
• Monitor the well condition at all times (i.e. depth, mud weight, weight on bit.) Recognize, interpret and respond to down hole conditions
• Perform drilling-related operations such as directional drilling, working stuck pipe, running and cementing casing strings, coring, fishing, and assisting in wireline logging, well testing, and other special operations.
• Supervise and direct operations in the picking up or laying down of tubular and all drilling-related equipment.
• Maintain accurate record of tubular and tool dimensions (i.e. internal and external diameter, fish neck, and serial numbers)
• Ensure that the solid control equipment and mud mixing operations are being monitored constantly
• Inform Toolpusher/Senior Toolpusher and Client Representative if a deviation from planned operation occurs
• Keep accurate records of fluid displacement when tubulars are run in/pulled out of well.
• Complete the IADC daily drilling report (GMS) at the end of each tour
• Hold pre-tour meeting with the drilling crew for all drilling operations.
• Secure the well during an emergency or well control situation; assist in the well-killing operations.
• Supervise the lubrication and maintenance of all drilling and associated equipment and ensure it is carried out in accordance with the Preventive Maintenance System (RMS).
• Maintain equipment files, drilling logs and records; perform all technical calculations required to carry out drilling operations
• Assist during the running and retrieving of marine risers and BOP stack
• Assist in the planning, organization and supervision of rig move operations.

Qualification

• High school diploma or equivalent. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.
• Successful completion of the at least one D-CAP Assessment (Onshore or Offshore).
• Valid medical examination and vaccination certificates.
• Valid well control certificate.
• Knowledge of all technical calculations required for the safe operation of the drilling unit and basic computer skills.

Interested and qualified candidates should:
Click here to apply online



Job Title: Toolpusher - Nigeria Nationals

Job ID: 2000802
Location: Lagos

Job Description
Operations/Maintenance:

• Ensure that the Driller is provided each tour with the Standing Instructions to Driller (SID) that is relevant to the planned operations.
• Monitor the maintenance, repair and installation of all drilling equipment including repair, lubrication, maintenance records, and inventory levels .
• Maintain records of inspections and certification of drilling equipment, tools and tubular.
• Ensure the mud mixing systems and solid control equipment are being monitored constantly and properly maintained.
• Relieve the Driller at the Driller’s console as operational requirement demands.
• Partake in the daily operations meeting with the OIM, Senior Toolpusher and other rig department heads.
• Monitor the application of the Company Rig Maintenance System (RMS) for drilling department maintenance tasks.
• Review and approve all drilling-related Permit to Work as the responsible person for the task.
• Assist in planning the job activities of the drilling department and associated activities.
• Ensure that well control requirements are in place according to operational requirements; assist in supervising well-killing operations in an emergency situation.
• Perform all well control calculations (i.e. mud weight increase, initial and final circulating pressures, number of strokes, etc.),
• Assist the Senior Toolpusher or OIM in coordinating the activities of third-party personnel responsible for various aspects of the well program and ensure that they understand Transocean policy and procedures related to the task and that they follow safety processes.
• Prepare Requisition Purchase Orders for equipment or parts necessary to keep the drilling operation free of downtime. Assist in ensuring that sufficient stock of parts and materials are maintained.
• Maintain proper communication with the Senior Toolpusher and OIM regarding the progress of drilling and associated operations.
• Recommend adjustments to drilling parameters as necessary to improve the overall drilling operation's performance.
• Promote and maintain an effective working relationship with other departments, third-party personnel and Customer Representatives.

Interested and qualified candidates should:
Click here to apply online



Job Title: Materials Coord - Nigeria Nationals

Job ID: 2000804
Location: Lagos
Reports to: The Senior Materials Coordinator or Chief Engineer or Maintenance Supervisor

Job Description

• Supervises the Assistant Materials Coordinator and ART Materials Trainee.

Basic Function:

• Coordinate the rig's materials requisitions, organize and control the warehouse, and maintain the warehouse inventory levels within established guidelines.
• Ensure warehouse activities are carried out in a safe and prudent manner.

Duties and Responsibilities

Materials and Inventory Control:

• Secure the warehouse at all times and restrict access to non-authorized personnel
• Receive materials into the warehouse stock and issue parts to departments as needed
• Liaise with department heads in the preparation of materials requisitions for all parts and equipment; focus on planning to minimize urgent orders; forward approved requisitions to the shore base office.
• Maintain accurate records of received and outstanding requisitions and cargo manifests. Track the progress of Purchase Orders.
• Maintain adequate stock levels of equipment spares and consumables to facilitate the continuous operation of the unit.
• Prepare periodic reports for the Rig Manager and shore-based Materials Manager as required.
• Perform cyclical inventory of stock and maintain the physical inventory in the warehouse.
• Review regularly obsolete and surplus parts and advise Rig Supervisors for follow up
• Utilize the computerized system to maintain an accurate inventory of all materials stored on the rig.
• Prepare manifest for all equipment dispatched from the rig either by sea or by air.
• Check for discrepancies in materials received against delivery notes and outward manifest. Issue Procurement Incident Report for incorrect items
• Assist department heads in establishing a realistic minimum/maximum warehouse stock of all shut-down or critical items
• Provide Fixed Asset Register information to department heads.
• Ensure all hazardous and non-hazardous wastes are correctly labeled and packaged prior to shipment ashore.

Qualification

• High school diploma or equivalent. Rig-based work experience and demonstrated ability of oral and written communication may be substituted in lieu of formal education.
• Valid medical examination and vaccination certificates.
• Basic computer skills.

Interested and qualified candidates should:
Click here to apply online



Job Title: Chief Mechanic - Nigeria Nationals
Job ID: 2000800
Location: Lagos
Reports to: The Mechanical Supervisor, Maintenance Supervisor, Chief Engineer or Offshore Installation Manager

Job Description

• Supervises the Mechanic.

Basic Function:

• Maintain and repair mechanical, pneumatic and hydraulic equipment onboard the rig.

Duties and Responsibilities
Operations/Maintenance:

Authority I:

• Perform daily inspections and maintenance of mechanical equipment.

Authority I:

• Organize and promote the Rig Maintenance System (RMS)

Authority II:

• Carry out periodic maintenance according to the RMS guidelines and coordinate same with supervisors and other department heads

Authority I:

• Maintain and repair power plants and monitor power distribution—ensure power is available at all times

Authority I:

• Operate, maintain and repair as necessary the engine cooling water system, lube oil system, and fuel system

Authority II:

• Troubleshoot and repair faulty mechanical, pneumatic and hydraulic drilling equipment and tools

Authority II:

• Assist in maintaining marine equipment, i.e. cranes, thrusters, ballast pumps and valves, auxiliary equipment, etc.

Authority I:

• Ensure that the permit to work and isolation systems are followed.

Authority II:

• Implement the follow-up requirements to audits, as issued by Clients, Regulatory Authorities or rig management

Authority II:

• Assist in ensuring that all third-party equipment is fit for purpose, certified, correctly installed, and maintained while on the rig

Authority I:

• Maintain an adequate supply of spares in order to fulfill maintenance requirements and facilitate a safe and efficient operation

Authority II:

• Supply information to assist in the development of maintenance and repair budget.

Authority I:

• Ensure that service, maintenance and other operational reports are accurate and complete.

Authority II:

• Liaise with the marine department regarding the loading, ordering and use of fuel, potable water, and drill water in consideration of the rig's stability.

Authority I:

• Inform supervisor and other department heads of any technical problems or limitations that may affect the safe operation of the rig.

Authority II:

• Plan and coordinate with other departments prior to any major activity such as rig moves, running and retrieving BOP, etc.

Authority I:

• Carry out classification society surveys as part of continuous survey of machinery.

Authority II:

• Communicate equipment problems or breakdown information via direct supervisor to Technical Field Support.

Qualification

• High school diploma or equivalent. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.
• Valid medical examination and vaccination certificates.
• Knowledge of technical calculations required for safe operation of the drilling unit and basic computer skills.

Interested and qualified candidates should:
Click here to apply online



 Job Title: Sr Materials Coord - Nigeria Nationals

Job ID: 2000803
Location: Lagos
Reports to: The OIM, Chief Engineer or Maintenance Supervisor

Job Description

• Supervises the Materials Coordinator, Assistant Materials Coordinator and Materials Trainee.

Basic Function:

• Coordinate the rig's materials requisitions, organize and control the warehouse, and maintain the warehouse inventory levels within established guidelines.
• Ensure that warehouse activities are carried out in a safe and prudent manner.

Duties and Responsibilities

Materials and Inventory Control:

• Secure the warehouse at all times and restrict access to non-authorized personnel
• Receive materials into the warehouse stock and issue parts to departments as needed
• Liaise with department heads in the preparation of materials requisitions for all parts and equipment; focus on planning to minimize urgent orders; forward approved requisitions to the shore base office.
• Maintain accurate records of received and outstanding requisitions and cargo manifests. Track the progress of Purchase Orders.
• Maintain adequate stock levels of equipment spares and consumables to facilitate the continuous operation of the unit.
• Prepare periodic reports for the Rig Manager and shore-based Materials Manager as required.
• Perform cyclical inventory of stock and maintain the physical inventory in the warehouse.
• Review regularly obsolete and surplus parts and advise Rig Supervisors for follow up
• Use the computerized system to maintain an accurate inventory of all materials stored on the rig.
• Prepare manifest for all equipment dispatched from the rig either by sea or by air.
• Check for discrepancies in materials received against delivery notes and outward manifest. Issue Procurement Incident Report for incorrect items
• Assist department heads in establishing a realistic minimum/maximum warehouse stock of all shut-down or critical items
• Provide Fixed Asset Register information to department heads
• Ensure that all hazardous and non-hazardous wastes are correctly labeled and packaged prior.

Qualification

• High school diploma or equivalent. Rig-based work experience and demonstrated ability of oral and written communication may be substituted in lieu of formal education.
• Valid medical examination and vaccination certificates.
• Basic computer skills.

Interested and qualified candidates should:
Click here to apply online



Job Title: 3rd Asst Marine Engineer - Nigeria Nationals
Job ID: 2000796
Location: Lagos
Reports to: The Second Assistant Engineer

Job Description

• Supervises the Motor Operator.

Basic Function:

• Assist in maintaining and repairing mechanical, pneumatic and hydraulic equipment onboard the vessel.

Duties and Responsibilities
Operations/Maintenance:

• Ensure conformance to Company policies, local and international regulations relating to the operation of the rig, and current pollution regulations - Authority I
• Perform daily inspections and maintenance on mechanical equipment - Authority I
• Ensure compliance with the Rig Maintenance System (RMS) and ensure all records are maintained on a timely basis - Authority II
• Carry out periodic maintenance according to RMS guidelines and coordinate that maintenance with supervisors and other department heads - Authority II
• Ensure that reports for repair and maintenance of equipment are accurate and complete - Authority II
• Assist with maintenance and repair of power plants, cooling water system, lube oil system, and fuel system - Authority II
• Assist in troubleshooting and repairing faulty mechanical, pneumatic and hydraulic drilling equipment and tools - Authority II
• Assist in maintaining marine equipment, i.e. cranes, thrusters, ballast pumps and valves, auxiliary equipment, etc. - Authority II
• Apply the permit to work and isolation systems as required - Authority I
• Assist in implementing outstanding recommendations from audits, as issued by Clients, Regulatory Authorities or rig management - Authority II
• In conjunction with the Second Engineer, monitor and control the use and distribution of consumables/materials; generate requisitions as required - Authority II
• Assist in ensuring that all third-party equipment is fit for purpose, certified, correctly installed, and maintained while on the rig - Authority II
• Ensure that service, maintenance and other operational reports are accurate and complete - Authority I
• Inform supervisor and other department heads of any technical problems or limitations that may affect the safe operation of the rig - Authority I
• Carry out classification society surveys as part of continuous survey of machinery - Authority I

QHSE:

• Incorporate the THINK planning process into all tasks, whether working alone or as part of a team - Authority I
• Participate in the START Process - Authority I
• Ensure that subordinate personnel are properly trained in the START process - Authority I
• Call a Time Out for Safety (TOFS) whenever an unplanned hazard or a change in the expected results is observed - Authority I
• Ensure compliance with regulatory requirements for environmental protection - Authority I
• Actively participate in weekly safety meetings and pre-job meetings as required - Authority I
• Respond to emergency situations and environmental protection issues as per designation on station bill - Authority II
• Report any incidents, potential hazards or abnormal situations to supervisor and other department heads - Authority I
• Ensure that a high standard of hygiene and housekeeping is maintained onboard the rig - Authority I
• Personnel:
• Meet the training requirements according to the applicable training matrix - Authority I
• Participate fully in the annual performance appraisal process - Authority I
• Mentor, develop and train crew members to ensure that they are competent to work at their next job level - Authority II
• Supervise and guide the Motor Operator and Mechanic Trainee in their On-the-Job Training (OJT) program - Authority I
• Maintain discipline onboard and ensure compliance with Company disciplinary procedures - Authority I

Definition of Decision Making Authority:

• Authority I: To act.
• Authority II: To act but inform supervisor and/or other interested parties
• Authority III: To obtain supervisor's approval before acting
• Note: The above is not a complete list of duties but a guide, as tasks and objectives can change depending on needs.in discipline onboard and ensure compliance with Company disciplinary procedures - Authority I

Definition of Decision Making Authority:

• Authority I: To act
• Authority II: To act but inform supervisor and/or other interested parties
• Authority III: To obtain supervisor's approval before acting
• Note: The above is not a complete list of duties but a guide, as tasks and objectives can change depending on needs.

Qualification

• High school diploma or equivalent. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.
• Valid 3rd Engineer Unlimited License (Class 3 Motor above 3000kW).
• Valid medical examination and vaccination certificates.
• Knowledge of technical calculations required for mechanical operations and basic computer skills.

Interested and qualified candidates should:
Click here to apply online



 Job Title: DPO National I - Level II Nigeria Nationals
Job ID: 2000798
Location: Lagos
Duties and Responsibilities

• Assist Chief Mate and Master with deck operations as required.
• Operate vessel's radios as needed under the supervision of the Chief Mate.
• Attend Nautical Institute approved Basic, Advanced Operators course and Transocean's Lessons Learned Course.
• Operate vessel's radars as necessary under the supervision of the Chief Mate.
• Perform emergency duties and responsibilities as stated on the Station Bill, DP Emergency Response Plan and vessel specific Emergency Response Manual.
• Completion of ISM familiarization material
• Monitor all DP room alarms including DP system, VMS, Fire & Gas and Prioritize alarm response as necessary to maintain DP system operability by calling for technical assistance or additional DP room help.
• Assist as directed by Chief Mate with rig projects.
• Complete the region OJT.
• Complete the vessel specific OJT.
• Procure valid home country and flag state GMDSS radio operators' license.
• Procure valid home country radar observers certification endorsed for ARPA.
• Controlling the vessel using manual and joystick controls.
• Use of the Data Logger to optimize DP and Power Plant Operations
• Use of the Data Logger to detect and mitigate DP and Power Plant problems
• Use of the Data Logger to backup data
• Export of Data Logger data to Excel Format
• Utilize radar displays for detection and interpretation of local severe weather patterns,

Principles and planning of Power Plant operations

• Basic understanding of diesel generator controls, operations, and failure modes.
• Principles of basic closed loop control system theory
• Familiarity with operation of MS Windows user interface.
• Familiarity with Emergency Response Manual.
• Familiarity with operation of all Corporate Software.

Principles of thrusters performance, failure modes, and operation

• Principles DP Operations.
• Basic knowledge of the practical operation of the DP control system, including changing between systems and the various modes of operation.
• Principles of DP processing of reference systems, wind sensors, VRS's, and other peripheral equipment.
• Basic operational theory, calibration methods, and failure modes of electronic riser and stack angle sensors.
• Basic understanding of WSOC, drift off calculations, and riser analysis
• Basic understanding of rig offset test to verify stack heading
• Basic understanding of ROV operations
• Basic understanding of EDS sequences and BOP operations
• Basic understanding of drilling operations and well control
• Basic understanding of boat handling
• Basic understanding of helicopter operations
• Basic operational theory and failure modes of pitch/roll/heave sensors.
• Basic operational theory and failure modes of satellite and acoustic position reference systems.
• Knowledge of general math, trigonometry, and geometry.
• Basic knowledge of architecture of distributed automation systems.
• System specific knowledge of DP Control System redundancy, alarms and warnings.
• System specific knowledge of Vessel Management System redundancy, alarms and warnings.
• Knowledge of operational response to all DP alarms (who to call, what to do)
• Knowledge of operational response to all Vessel Management System alarms (who to call, what to do)
• Knowledge of vessel's operations manuals and communications system
• Knowledge of vessel's FMEA and its implications.

Interested and qualified candidates should:
Click here to apply online


Job Title: 3rd Mate - Nigeria Nationals
Job ID: 2000797
Location: Lagos
Reports to: The Chief Mechanic
Job Description

• Supervises the Motor Operator.

Basic Function:

• Assist the 2nd Mate in operating the automated and fixed station keeping system of the rig and stand navigation watch as required.
• Assist in ensuring that the rig's navigation systems are correct, current, and maintained in full working order.

Duties and Responsibilities
Operations/Maintenance:

Authority I:

• Ensure all navigation operations are carried out in accordance to Company policies and procedures.

Authority III:

• Operate dynamic positioning (DP) equipment under the direction of the 2nd Mate.

Authority II:

• Assist in maintaining the rig in a stable condition and at the correct draft and trim.

Authority II:

• Assist in the setup of the DP system operational parameters - ensure all DP system data are recorded.

Authority II

• Assist in performing Preventive Maintenance on DP equipment.

Authority II:

• Assist with running and maintaining records for hydrophones and subsea beacons.

Authority II:

• Make regular use of the onboard simulator for training purposes, where available.

Authority II:

• Ensure there is adequate power and reserves of power for the maintenance of position and operations - give immediate attention to any problems.

Authority I:

• Ensure that all defects and anomalies are reported to the 2nd Mate or Chief Mate and relevant department heads. Maintain records of these and ensure they are corrected adequately.

Authority II:

• Understudy the 2nd Mate and deputize as required. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.
• Valid Unlimited 3rd Mates License. Nautical Institute Dynamic Positioning courses.
• Valid medical examination and vaccination certificates.
• Knowledge of all technical calculations required for the safe operation of the drilling unit and basic computer skills.

Qualification

• High school diploma or equivalent. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.
• Valid Unlimited 3rd Mates License. Nautical Institute Dynamic Positioning courses.
• Valid medical examination and vaccination certificates.
• Knowledge of all technical calculations required for the safe operation of the drilling unit and basic computer skills.

Interested and qualified candidates should:
Click here to apply online

Application Deadline 20th February, 2014.

---