Daewoo Nigeria Limited Job Vacancies for Experienced Engineers, November 2014

Daewoo Nigeria Limited a leading Engineering, Procurement & Construction (EPC) Company in the Oil and Gas Industry is currently seeking for suitably qualified candidates to fill the following job openings in her outfit:



Position: Mechanical Engineer (MENGR)
Duties & Responsibilities

• Review ITT documents and clarify issues with client during project proposal
• Prepare mechanical data sheets and specifications
• Develop manufacturing drawings
• Preparation of technical Bid evaluation
• FEED Verification Vendor print review and RFQ Preparation
• Confer with system engineers and other personnel to implement operating procedures, resolve system malfunctions, and provide technical information.

• University degree in Mechanical Engineering or its equivalent
• 10yrs cognate experience in major plant construction projects
• Expert knowledge of Plant Construction work Sequence in oil & gas infrastructure projects
• MS Office & Compress software)

• FEED Verification.
• Detailed Electrical engineering design.
• Preparation of Technical Data Sheet and Specifications
• ITB Review, Deviation, Exception & Clarification
• Risk & Assumption
• Man Hour estimation
• Engineering Schedule
• Prepare Material Requisition/rfq
• TBE (Technical Bid Evaluation)
• As-built drawings/documentation

• University degree in Mechanical Engineering or its equivalent
• 10yrs cognate experience in major plant construction projects
• Expert knowledge of Plant Construction work Sequence in oil & gas infrastructure projects
• MS Office & Compress software)

• Prepare detail design for foundation, drainage, road etc.
• Review and modification of Shop drawing and routine contract administration
• Produce structure design and sketches to incorporate in drawing
• FEED verification
• Perform structure design in line with work scope and standard
• Take part in structural Design at the request of the Structural coordinator.

• University degree in Civil Engineering
• 8yrs cognate experience in major oil and gas facilities civil engineering design.
• Proficiency in application of Auto CAD, Excel, MS Office, STAAD Pro. V8i, GRL Weap 20.

• Prepare FEED clarification for structure and detail engineering drawing
• Analysis of configurations of basic structural components of structures
• Prepare comment sheet to be issued to subcontractor
• Planning of work sequence to ensure work is completed in accordance with schedule
• Prepare Structure calculation sheet and bill of material
• Liaising with other designers to agree on safe designs and their fit with the concept of construction
• Prepare structural design specifications

• Minimum of university degree in Civil Engineering or its equivalent
• 8yrs cognate experience in oil and gas facilities engineering
• Expert knowledge of Plant Construction work Sequence in oil & gas infrastructure projects.
• Proficiency in application of STAAD Pro. V8i, GRL Weap 2005 softwares, Auto CAD, MS Office Suite

• Construction equipment usage planning, and coordination,
• Prepare the construction equipment maintenance schedule
• Prepare spare parts procurement schedule as well as maintain good storage and management system
• Inspect all equipment for construction and certification by Client prior to mobilization to the worksite.
• Coordinate all the work of heavy equipment section.

• University degree in Mechanical Engineering or its equivalent with a min of 10yrs experience in major plant construction firm

• Preparation of Drawings (Plot Plan, General Arrangements, Isometric, Alignment, Support drawings)
• Conceptualize plans, details and sections to accurately convey construction or fabrication requirements.
• Checking and back checking computer modelings and piping drawings
• FEED Verification
• P&ID interpretation
• Identification of Tie- in Points on the P&ID and on the existing facilities in site.
• AUTO CAD work

• University degree in Mechanical Engineering or its equivalent with min of 8yrs experience in the Oil & Gas industry facilities design.
• Proficiency in application of Auto CAD, Excel, MS Office, Navis works, Ceasar II & PDMS

• Review all report about Project
• Analyze the Cost and Schedule Impact about Critical Issues in Project
• Researching suitable solutions and estimating costs and timescales
• Report all about Forecasted Cost, Schedule, etc.
• Extension of time calculation and preparation of variation orders.

• University degree or equivalent with a minimum 12yrs or more of direct experience in oil & gas facilities project projects.
• Expert knowledge of plant construction work sequence in oil & gas infrastructure projects
• Proficiency in MS Office Suite
• Ability to interpret electrical

• Guide and direct resolution of project difficulties and complex control problems.
• Interact with client and attend regular project meetings
• Develop and maintain established standards to exhibit schedule and plan hierarchy
• Determine design changes and schedule slippages impact
• Recommend project control systems to satisfy project requirement
• Invoicing to Client on milestone & work progress basis
• Create, review and manage project schedules to identify progress, lead times and project sequences

• Minimum of Bachelor’s degree qualification in Engineering/Project Management discipline
• 10-12 yrs cognate experience in project management & control in the Oil and Gas Industry.
• Proficiency in application of MS Office Suite

• Assessment/Determination of equipment, material and labour needed to complete whole task.
• Coordinates the services and activities of sub-contractors as assigned for the purpose of ensuring that contracted work is completed in a safe, effective and timely manner
• Directs and coordinates all electrical installation works in line with detailed engineering drawings
• Responsible for manpower distribution and scheduling for electrical works

• Minimum of 10 years relevant Electrical work coordination experience in Oil and Gas facilities project
• Minimum of HND certificate
• Good understanding of hydraulic machinery and diesel engine

• Perform material identification and traceability through applicable heat numbers
• Review of Mill Test Reports (MTR) for piping items and welding consumables
• Verification of availability & control of welding consumables
• Identify welds, for Post Weld Heat Treatment (PWHT) and provide instructions.
• Periodic inspections to ensure correct Welding Procedure Specifications (WPS) are being-used
• Review Radiographic Testing (RT) films and Accept/Reject RT reports provided.
• Review and accept/reject all other NDE reports PWHT reports
• Verify hydro-test arrangements and check Non Destructive Examination (NDE) completion for compliance to code and client requirement.

• Minimum of university degree in Mechanical Engineering or its equivalent, ASNT Level II
• 10 years experience in NDE works in Oil & Gas or Petrochemical facilities projects
• Must be able to pass a Drug & Alcohol test API 510 and Valid Eye Test,

• Perform Process Detail Engineering
• Perform Interdisciplinary Support during bidding and detail design
• Prepare AS-Built documents for Hand-Over to client
• Review ITT documents and clarify issues with client during project proposal
• Attend FEED/ITT Clarification meetings with client
• Plan schedule of deliverables
• Perform FEED Verification
• Project Scope Definition
• Prepare & coordinate Independent Design Review (IDR)

• Minimum of Bachelor’s degree qualification in chemical Engineering discipline
• 8yrs cognate experience in oil and gas facilities engineering.
• Proficient in application of MS Office Suite, Hysis, Unisim, Olga & Pipesim softwares applications

• Implement internal procedures to facilitate job function and responsibilities
• Control and coordinate approval processes in relation to project budgets and revisions
• Control project costs and expenses
• Ensure adequate cost savings and efficiency
• Ensure project milestone billing and collections, Variations, correspondences are done on a timely basis

• Minimum of Bachelors degree in Business/Social sciences and/or Engineering & Project Management discipline
• Minimum of 8-10yrs cognate experience in oil & gas construction industry.
• Proficient in MS Office Suite

• Manpower planning, forecasting and HSE resources to support the Project
• Coordinate HSE activities on the Project
• Ensure HSE Program is an integral part of the Project and that the design is risk-based.
• Organize, carry out and attend any scheduled HSE audits
• Coordinate and compile HSE input during engineering to Project progress report Noise Control in Design.

• Minimum of Bachelor’s degree qualification in Social Science and/or Engineering discipline
• Minimum of 8yrs cognate experience in oil and gas industry construction work
• Self-confident, able to execute position responsibilities with minimal guidance
• Demonstrate expertise with Microsoft Excel, Word and PowerPoint or equivalent software

• Responsible for System Commissioning Execution Plan, Budget, Equipment Data Sheet Review. Static and Dynamic Testing Procedures.
• Conducts Risk Assessment to ensure proper work methods and safe work conditions.
• Responsible for Plant General Inspection and Safety Audit programmes for commissioning operations.
• Plant troubleshooting

• Minimum of Bachelor’s degree qualification in relevant science and/or Engineering discipline
• 10 years of relevant commissioning experience in Oil & Gas production and processing facilities
• Experience of working in compliance with International Standards
• Good computer skills – Proficient in MS Office Suite

• P&1D Interpretation.
• Design and preparation of instrument data sheet.
• Design instrument layout and drawings
• Review as well as verify FEED documents and Drawings
• Review Instrument Vendor Print Documents
• Prepared As-Built document as part of hand-over document to Client.
• Design & preparation of pneumatic, process and electrical hook ups.
• Design and prepare technical specifications

• Minimum of Bachelor’s Degree in Electronics & instrumentation Engineering
• 8yrs cognate experience in the oil and gas industry
• Proficiency in MS Office Suite, INSTRU CALC 7.0, Intools
• Ample understanding and command in specific control disciplines such as advanced process control (APC), distributed control systems (DCS), programmable logic controllers (PLC), and supervisory control and data acquisition (SCADA)

• Prepare, plan, update and ascertain the functionality of equipment
• Carry out Loop checks
• Installation of pressure transmitters/guages, junction boxex
• Instrument cable wiring, cable tray routing
• Instrument calibration.

• Minimum of HND in Electronics & instrumentation Engineering Discipline
• 10 years cognate experience as an instrumentation specialist