Jobs

Ongoing Recruitment at Amaiden Energy Nigeria Limited, 7th May, 2018

Amaiden Energy Nigeria Limited, (formerly Moody International Nigeria Limited) was established in 1996 as a partnership between Moody International Group and Nigerian investors. Since commencing operations in March 1997 the company continues to grow and exerts its presence in numerous Projects in the Nigeria Oil and Gas Industry. We are recruiting to fill the position below: Job Title: Construction Site Lead - EXPAT Location: Nigeria Job Type: Contracts Category: Building and Construction Job Nature: Onshore Rotation – 56 days on/14 days off Main Functions

Lead Site Safety
Lead company site team (as assigned) for completion of construction activities in accordance with project objectives, priorities, and contract specifications
Serve as member of the Project Team (PT) when project assigned
Oversee the execution of fabrication, construction, and hookup
Coordinate activities of site safety, technical, and quality inspection personnel
Determine if corrective actions are needed in order to meet project objectives, and work to have these implemented
Coordinate site interfaces between contractors (and subcontractors) with Production Operations, Drilling, and other ongoing projects as applicable
Report progress, performance, initiatives, issues, and challenges to Construction Site Manager or Project Manager as appropriate.

Tasks and Responsibilities

Champion the Company Sites Leadership Expectations
Champion on-site safety awareness and safe performance with contractor and among Project Team members
Lead/assist in preparation and development of construction planning deliverables (Pre-Check Point 2)
Interface with contractor on a day to day basis
Provide input in the review and development of contractor’s detailed plans and procedures
Monitor and appraise contractor’s performance and recommend corrective action to be taken where deficiencies are detected; verify actions are taken
Coordinate resolution of construction related issues with guidance from supervisor
Establish, implement, and maintain verification process for mechanical completion
Utilize best practices, Comes, and other current Construction systems/tools
Ensure appropriate materials management system is implemented at site
Coordinate with on-site personnel regarding planning and implementation of fabrication, construction, and mechanical completion activities
Participate in company's learned reviews and provide input to close-out report sections upon completion of work
Ensure execution of the contract is in compliance with contract specifications
Ensure change requests are in accordance with Management of Change Plan
Provide input to appraisal process for assigned site personnel
Manage the project business services and contracting and materials management organization and functional interfaces through the Execution Stage.

Job Requirement

Year's experience in-field Construction planning, execution, and completions
BS in Engineering, Construction Management, or Technical degree
Willing to travel (domestic/overseas) to project sites
Past Construction Site Lead experience on major capital project.

Job Title: Project Manager (non-IT) III Expat Location: Sokoto, Nigeria Category: Others Job Type: Contracts Job Nature: Rotation (4 weeks on/4 weeks off) Job Description

Responsible for planning, coordinating, implementing and finalizing projects according to the specifications and deadlines, all while keeping the project within budget.
Creates and reports project status and allocates resources as needed.
Defines project governance policies and manages the financial concerns.
Communicates and interfaces with all levels and across organizational lines, including the business units.
May partner with external vendors based on the nature of the project.
Minimal work direction needed, highly skilled and knowledgeable to the position.
Project Managers on Expert Level is usually responsible for large, highly integrated projects

Job Requirements

Bachelors Degree preferred.
Strong verbal and written communication skills. Excellent organizational skills. MS Project or other project management tools. Consensus building skills.
Behavioral Skills: creates ownership, drives functional excellence, promotes productive impact, effectively manages external relationships
Technical Skills: contracting / subcontracting, design & engineering management, execution planning, cost estimating, planning & scheduling, project controls, cost & schedule methods & data management, quality management.

Job Title: Project Logistics Coordinator Location: Nigeria Job Type: Contracts Job Nature: Resident Description

Support Logistics Manager/Lead with Logistics and Materials Management expertise, interfacing with Contractor Logistics and Materials Management personnel
Interface with and influence project disciplines to ensure logistics/materials management considerations are included in design and project plan
Interface with procurement to understand and influence contracting, materials management, logistics plan for deliveries and customs procedures
Develop an understanding of local transport and in-country logistics capabilities and capacities
Develop logistics elements of bid requirements, monitor KPIs, and coordinate progress reporting and materials management requirements
Familiarity with Logistics Contractors and resources in worldwide markets Coordinate process to pre-qualify, approve, and reevaluate Logistics Contractors
Develop project and discipline specific work scope for Contractors
Strong understanding of the capabilities and limitations of Logistics Contractors
Interface with Logistics Manager/Lead and Construction to keep them informed of the qualifications and capabilities of relevant Contractors
Interface with Contractors to ensure safety, quality, availability, and reliability of logistics execution
Qualify and endorse Contractor equipment and services
Identify, qualify, and endorse vendor support infrastructure
General knowledge of local and national environmental and regulatory requirements
Interface with other Logistics Coordinators, Leads, Advisors and project planning teams to understand and resolve logistics issues
Ensure that the EPC Contractor has issued necessary Purchase Order (POs) in accordance with the published project schedule and Required On Site (ROS) dates and that the EPC Contractor verifies that the vendor has received and agrees to comply with the PO terms
Verify that the delivery documentation is complete, consistent and adequate and in accordance with the PO terms
Ensure that the materials specification delivered by the vendor is according to PO terms
Ensure that any changes to the Purchase Order terms are validated through the Project Management Team (PMT)
Ensure that the EPC issues a weekly report showing the status of all POs issued to date paying particular attention to ROS dates and Project Schedule. This report will show transport, receiving, customs clearing, storage and issuing of materials to the line item level. It will also show all exemption or exceptions and rejected materials
Ensure all materials received are stored in a safe and secure facility and that the preservation code addressed in the PO has been applied
Ensure that the EPC complies with the PO and that each item delivered to the storage facility is adequately marked for easy traceability
Reports all Overage, Shortage and Damaged (OS&D) of the received materials to the PMT
Create a file and maintain adequate records of each major transaction/shipment/PO
Keep a Materials Issue Report Register

Job Requirements

Experience in logistics planning and execution, construction, safety, and procurement
Technical training or high school diploma
B.S in Engineering, Construction Management, or other Technical degree
Willing to business travel (domestic/overseas) to project sites to provide functional support

Job Title: Rig Supervisor - EXPAT Location: Nigeria Job Type: Contracts Job Nature: Rotation (4 weeks on/4 weeks off) Category: Automobile / Automotive Description

Represents the company on a rig site to support the safe and efficient execution of well plans.
Is the primary contact for rig and third party personnel to ensure logistics for personnel, equipment and services are appropriately organized and managed.

Responsibilities

Responsible for communicating expectations regarding safety, security, health, and environment; provides guidance and supports managing Safety, Security, Health, and Environment (SSHE) events
Responsible for communicating Operations Integrity Management Systems (OIMS) expectations on the rig site
Monitors rig operations to provide feedback and input to the rig contractor to ensure well control procedures are properly followed and emergency situations are appropriately managed
Responsible for ensuring that safety, operational, environmental, security and other drills are conducted on site at specified frequencies
Responsible for ensuring drilling and completion procedures are followed as approved and utilizes management of change processes if changes are required
Orders and organizes logistics for services and equipment necessary to conduct drilling and completion operations efficiently
Supports onsite surveillance requirements for the operation in areas such as kick detection, abnormal pressure detection, torque & drag, mud properties, and solids control efficiency
Responsible for generation of accurate and adequate operations reports
Interfaces with engineering and geology to ensure understanding of well objectives and procedural requirements

Job Requirements

Industry experience in rig supervisory or rig leadership roles for drilling and completion operations
Prior experience working for a major Operator or Drilling Contractor
Hold current certification for Well Control

Job Title: Systems Completion Engineer / Specialist Location: Lagos Job Type: Contracts Job Nature: Resident Job Description

With a strong commitment to Health, Safety, Security and Environment (HSSE), take responsibility for planning and executing a completion well designs for an oil or gas well
Prepare testing/completion programs, including equipment specification and selection, flow modelling, stress analysis
Prepare cost estimates and cost control for completion activities
Awareness of and involvement in new completions technologies, with appropriate incorporation into designs and work programs.
Evaluate executions and operations performance
Ensure completion programs, program amendments, and dispensations to policy are prepared on schedule and are adequately risk assessed
Liaise with sub-surface and production team to ensure completion design is fit for purpose
Onsite support for key completion operations
Provide engineering support for completion operations
Implement best practices as identified in engineering & operational studies
Perform post-analyses and benchmarking studies
Incorporate learnings into future completion programs
Assure adequate third party Quality Assurance and Quality Control
Recommend and conduct engineering studies to improve completion operational performance
Ensure appropriate assurance and review of the completion design and work plan
Coach and mentor completion engineers to ensure appropriate technical development
Prepare end of well reports

Job Requirements

Intermediate level professional position requiring a Bachelors degree and experience
Experience in similar position

Job Title: Planning and Scheduling Engineer II Location: Nigeria Job Type: Contracts Job Nature: Resident Description

Provide overall project schedule, progress measurement, and change management expertise
Ensures that the schedule control & progress procedures are developed and executed by the Contractor’s to monitor its schedule control activities and progress reporting
Coordinates, monitors, and assesses Contractor’s efforts in project planning, progress measurement and control
Reviews project changes to evaluate detail schedule impact; responsible for quantifying and incorporating the effect and impact of approved changes in the overall schedule stewardship and reporting
Following alignment with Planning Lead, advises Project Controls Lead and Project Team of any potential schedule issues and when necessary, provides guidance on, corrective action and measures to mitigate any adverse trends
Assists Planning Lead and Project Controls Lead in developing and reviewing schedule corrective actions and recovery plans, and verifies needed actions/plans are implemented
Monitors and appraises the performance of the Contractor compared to agreed control plans in the areas of progress and schedule control
Reviews Contractor’s project control procedures to ensure that Company’s and Contract requirements are met
Reviews and checks Contractor’s progress reports for accuracy of progress measurement and when necessary, reviews and endorses claimed progress reported by Contractor
Reviews, monitors and control the Contractor’s schedules for all project activities for logic, level of detail, interfaces, etc. (e.g., Level 3, Level 4, short-term look-ahead schedules)
Analyzes schedule and progress trends reported by Contractor
Analyzes the planned quantity metrics projections for all home office and site disciplines (e.g. Piping, Civil, Electrical, etc.) and monitors actual metrics quantities completed against planned
Supporting the Project Team with ongoing project schedule analysis, reporting, and forecasting activities
Develop and document Schedules annual and multi-year, and ensuring that these products reflect the approved project design/execution scope
Analyze schedule trends, develop and review schedule forecasts
Monitor and report on schedule implications of changes
Prepares and compiles weekly and monthly Reports (schedule & progress) as required.
Participate in developing Contract Control Schedules and Milestones
Participate in contract bid evaluations (as required)
Responds to ad hoc requests from Project Management Team (PMT) related to Project Controls/Reporting
Participates in gathering and recording Lessons Learned for the project that relate to progress and schedule areas
Maintain regular contact with project teams and with the Functional Organization
Maintain close liaison with planning engineers in the project teams
Provide direction and feedback to Project planning and control engineers on schedule aspects of the project
Drives and promotes capital efficiency in Project Services and on stewarded projects

Job Requirements

Bachelor of Science Degree in Engineering, Engineering Technology or Construction Management
Project controls experience focused on planning and schedule control
Technical discipline certifications commensurate with work experience
Willing to work overseas in a team environment
Willing to relocate to required project site
10 to 20 years of related experience.

Job Title: Plant / Process Operator Location: Nigeria Job Type: Contracts Job Nature: Rotation (4 weeks on/4 weeks off) Description

Work cooperatively with Contractor personnel to prepare and maintain a safe work environment for their work
Responsible for participation in the Operations Emergency Response activities relating to the Area
Provide support and coordination with the Systems Completion team in start-up and commissioning of the facilities
Take part in the review of work packages for planned maintenance activities within allocated Area, confirms that isolation requirements are applied, and ensures that the preparation of equipment is planned in a manner that provides a safe environment in which personnel can work
Endorse Work Permits as the Area Operator (AO). Endorse Work Permits as the Isolating Authority (IA) when required.
Encourages team effort between Maintenance and Operations groups
Supports work prioritization to maximize effectiveness and to complement the efforts of other work groups
Ensuring the CRT is informed and consulted about operations and major issues
Ensures good communication between Areas so that issues can be adequately addressed and actions completed
Responsible for maintaining good housekeeping in allocated Area
Maintain a daily log and shift changeover notes
Safely perform physical tasks at times, e.g. moving drums of chemicals, lifting, climbing ladders/silos/tanks
May perform minor maintenance to equipment
Maintain a high standard of plant housekeeping
Make process changes to ensure quality control of end products that are within accepted standards

Job Requirements

5+ years’ industry experience in operations, or similar; required
Expert in production operations/processes
Expert in P&IDs, PFD’s and UFD’s
Able to read shutdown logic diagrams
Highest standard of Safety, Health, Environment aptitude and cultivates the same in others
Excellent communications (oral & written) in English
Good interpersonal and motivation skills
Ability to interact in a multi-cultural environment
Advanced understanding and operation of Emergency Preparedness Procedures
Good knowledge of safety management tools and processes. (Permit to Work (PTW), Stepback 5x5, Job Safety Analysis (JSA), Risk Assessment)
Understanding of Controls Integrity Management System (CIMS), safety management tools and Production Operations Best Practices (POBP)/ Planning & Budgeting (P&B) processes
TTC Apprenticeship Program graduates
Previous experience as a technician in Oil & Gas facilities
Willingness to switch to Production / Process trade

Job Title: Mechanical Technician Location: Nigeria Job Type: Contracts Job Nature: Rotation (2 weeks on/2 weeks off) Description

Actively participate in the use of all on the job safety tools
Review job packs
Identify any safety issues associated with job end ensure removal/mitigation prior to working
Execute work as planned
Record technical history as required by workgroup. (Global Reliability Tool (GRT), data sheet, etc.)
Provide feedback on job pack improvements to Execution FLS
Request permits and notify Supervisor if permit cannot be issued within 30 minutes of requested time

Job Requirements

Years of closely related field experience
Discipline appropriate certification(s) if applicable or equivalent professional experience
Effective communication skills; ability to clearly and concisely describe conditions in the field and recommend remediation steps
Team Player; exhibits effective teamwork when working with persons over whom the person may have no direct authority and willingness to assist others
Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities
Proficient in Microsoft Office suite of software programs

Job Title: Marine Advisor Location: Nigeria Job Type: Contracts Job Nature: Rotation (2 weeks on/2 weeks off) Main Functions Works to assure the safe and efficient turnaround of gas carriers and condensate tankers. This will include assisting with the management and oversight of all associated critical contractors including tug, and port services providers:

Senior Deck Officer: Vessel Admin, Regulatory Compliance, SSHE (Safety, Security, Health and Environment), Risk Management, Vessel Communications, Navigation, Ship handling, Cargo and Ballast Operations, Marine Quality Assurance
Senior Engine Officer: Vessel Admin, Regulatory Compliance, SSHE, Marine Systems and Machinery and Equipment, Project Management, Planned Maintenance, Marine Quality Assurance
Operator / Technician: Vessel Admin, SSHE, Risk Management, Machinery Operations and Machinery Maintenance, Cargo and Ballast Operations
Special Licensing and Certification required by Law to operate tank ships.
Special Licensing and Certification preferred or may be required or preferred for offshore installations and marine shore side positions including marine assignments supporting Upstream projects.

Tasks and Responsibilities Deck:

Leads department, assigns related duties.
Calculates vessel drafts, stability, and hull stresses to ensure compliance with maximum permissible limits.
Maintains the main deck, accommodation space and exterior of the vessel.
Proficient in the use of all navigation and communication equipment.
Proficient in the use of all emergency response equipment.
Advises the Chief Engineer of mechanical or electrical needs of the deck department.
Assists the Chief Engineer in the preparation of shipyard specifications related to the deck department.

Engine:

Operate and maintain primary and aux marine systems.
Operate and troubleshoot machinery and equipment.
Assist vessel response and damage control.
Prepares repair specifications, work packages and project execution

Job Requirements

Deck Officer Licensing and Certification: Coast Guard License (Unlimited), Radar Observer, STCW (International Convention on Standards of Training, Certification and Watch keeping for Seafarers), GMDSS (Global Maritime Distress and Safety System), MMD (Merchant Mariner Document any unlicensed deck rating, Tankerman-PIC (DL dangerous liquids))
Engine Officer: Coast Guard License (Unlimited Steam/Motor as applicable), STCW, MMD (Any unlicensed engine rating, Refrigeration, Tankerman-Engine or PIC (DL))
10 years plus marine experience at a senior officer position required
5 years or more experience in the company operations organization preferred
University Degree preferred

Job Title: Interface Coordinator I Location: Lagos Job Type: Contracts Job Nature: Resident Job Description

Manages interfaces on technical issues with senior government departmental heads (Secretaries and Directors) and co-ventures and coordinates technical inputs from geosciences and drilling
Implements project wide Interface Management program based on standard process and company's lessons learned from other projects
Defines and stewards interface management plans and drives resolution of key interface issues
Ensures consistent and effective implementation of interface management plans applied project wide
Provides direction to sub-project interface coordinators for implementation of interface management processes
Reviews and endorses contractors' interface management plans and procedures
Ensures that Contractors maintain comprehensive registers of interface requirements and update status regularly; drives closure of contractor interface issues
Provides guidance to contractors as needed for alignment with all interfacing partners
Technically assesses criticality of interfaces and issues associated with late or missing information
Interface with Start-up / Operations to ensure clear understanding of project quality and participate in turnover as appropriate
Works with Project Managers to resolve any contractual issues/ change orders around interfaces

Job Requirements

BS in Engineering
Relevant experience in project activities related to oil and gas production and development
Effective communication and presentation skills
Must be able to work in multicultural environment
Knowledge of elements and implementation
5 - 10 years experience
Strong work ethic; self-motivated with excellent work organization

Job Title: Maintenance Planner / Scheduler Location: Nigeria Job Type: Contracts Job Nature: Rotation (2 weeks on/2 weeks off) Main Functions

To be responsible for the planning and scheduling of all Maintenance activities. Should have good understanding of safety, health, and environmental requirements (SHE), work selection criteria, work planning, norms estimating, procurement practices, business practices and controls, contractor interface awareness, development of job packs, etc.
Skilled in scheduling work tasks to ensure efficient resource utilization, excellent coordination between operations (equipment readiness / permitting), material availability, construction equipment support, and labor crew (skills) composition and assignment.
Typical Job Positions may include: Maintenance Planner / Scheduler, Maintenance Lead, Planner/Scheduler.

Tasks and Responsibilities

Demonstrates SAFETY is the top priority
Participates in planning with Core/Work Teams
Plans and schedules any Routine Maintenance work required
Works with Planner in developing schedule, cost estimates and equipment planning for Routine work to be accomplished during the Turnaround window.

Job Requirements

Bachelor's degree in Engineering within an applicable discipline, appropriate certification(s) within discipline, or equivalent professional experience
Effective verbal and written communication skills; ability to clearly and concisely convey recommendations to management
Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities
Proficient in Microsoft Office suite of software programs.

How to Apply Interested and qualified candidates should: Click here to apply Application Deadline 9th May, 2018.

Sokoto State and 1 other location

Sokoto State, Lagos State