Jobs

Job Recruitment at Padua Petroleum Nigeria Limited (PPNL), 7th May, 2019


Padua Petroleum Nigeria Limited (PPNL) is an indigenous company established to provide a unique range of services to the Nigerian Oil and Gas Industry. We venture into the this industry with the objective of building on existing limited in- country capacity. In view of the enormous opportunities which abound in the Oil and Gas industry in Nigeria and the new findings in other African countries, there is need for more indigenous players to fill the yawning gap by providing competitiveness and quality service delivery to the industry. We are recruiting to fill the position below:
Job Title: Pipeline Engineer Location: LagosDuties and Responsibilities
  • Prepare General Arrangement drawings in accordance with Good Engineering Practice as stated in relevant and applicable codes and standard, making corrections where necessary.
  • Prepare equipment datasheets based on details/data provided on PEFS, vendor documents and relevant codes and standards applicable for each project.
  • Prepare Material Take off (MTO), Tie-In and Manual Valve Lists
  • Review Piping Isometrics, making corrections where necessary.
  • To ensure deliverables are issued to meet the set targets.
  • Ensure participation in all QHSSE programmes.
  • Intervene and/or report unsafe acts / conditions and near misses
  • Preparation & Issue of Scope of work (input to RFQ), evaluation of vendor’s quotations, clarifications, Technical Bid Analysis etc.
  • Good knowledge of engineering design codes like, ASME, API, ANSI, ASTM, NFPA, BS, TEMA & and standards like Shell DEP, Total GS, Mobil GP, Chevron CES, etc.
  • Review of vendor’s documents, calculations, reports, drawings, datasheets, specifications and calculations.
  • To ensure deliverables are issued to meet the set targets.
  • Review and update all deliverables issued to clients to ensure they meet and/or exceed clients’ expectations at all times.
  • Interface and communicate with other departments to achieve project goals
  • Intervene and/or report unsafe acts / conditions and near misses
  • Preparation of Mechanical FEED and DED Documents for all projects under the supervision of senior engineers.
Qualification & Experience
  • A relevant Engineering Degree or equivalent.
  • Good knowledge in software such as AutoCAD, Caesar II, Auto Pipe, PV-Elite, PDMS, Auto PLANT, HTRI.
  • Must be familiar with Microsoft Office especially Excel, Access & Word and other applicable software.
  • Strong organizational skills, technical competence and attention to details.
  • At least five (5) years of progressive experience in design and facilities engineering both Onshore and Offshore, Green and Brown fields in the oil and gas industry
  • Field engineering and construction experience is an asset.
  • Competent oral (English) and written communication skills
  • Knowledge of industry/regulatory standards
  • Proficiency in reading and understanding technical drawings/diagrams
  • Develop, mentor and coach junior engineers.
  • Management techniques and delegation of tasks
  • Inter Personal skills communication and effective listening
  • Leadership skill and ability to supervise and check the work of others successfully.
  • Thorough document review, decision-making and time management skills
Job Title: Civil Structural Engineer Location: Lagos Duties and Responsibilities
  • Preparation of civil/structural drawings for both steel and reinforced concrete elements using AutoCAD.
  • Preparation of structural analysis and design reports for pipe racks, platforms and reinforced concrete equipment and foundations.
  • Preparation of project design specifications.
  • Preparation of Structural Models and detailed drawings using AutoCAD Structural Detailing 3D/2D
  • Preparation of Materials Take-off (MTO) and Bill of Quantities (BOQ)
  • Review (as guided by a senior engineer) engineering design drawings, reports and specifications submitted by the design consultants to ensure completeness, correctness and compliance.
  • Good knowledge of engineering design codes like DNV, ASME, BS & Eurocodes and standards like DEP, GS, GP, CES, etc.
  • Attend Technical meetings with the design consultants and other Sub-Consultants, Contractors.
  • Review and reply to bidders’ clarifications, participate in issuing bulletins and attending Technical Meetings with bidders during Tender preparation.
  • Perform other duties as requested.
Qualification & Experience
  • A relevant Engineering degree or equivalent.
  • Advanced computer skills and experience with major drafting and design software such as AutoCAD, STAAD Pro, CADWorx, and SACS, AutoPLANT and PDMS
  • Strong organizational skills, technical competence and attention to details
  • At least five (5) years of progressive experience in design and facilities engineering both Onshore and Offshore, Green and Brown fields in the oil and gas industry
  • Field engineering and construction experience is an asset.
  • Competent oral (English) and written communication skills
  • Knowledge of industry/regulatory standards
  • Proficiency in reading and understanding technical drawings/diagrams
    Job Title: Mech/Piping Designer Location: Lagos Duties and Responsibilities
  • Ensuring planned engineering (process) progress with respect to the engineering deliverables for Tenders (as required) and awarded Projects, process engineering planning & scheduling, preparation of progress reports, manpower & resource forecasts, time schedules of engineers, utilization of resources effectively & efficiently.
  • Process Design & Detail Engineering including performing process simulations, design calculations, Process Optimization, sizing & selection of equipment etc. for Tenders (as required) and for awarded Projects. Review of Clients tender documents, specifications, datasheets, verification of FEED design & calculations.
  • Preparation of various engineering deliverables (Drawings & Documents) such as Process Flow Diagrams, P & I Diagrams, Process Datasheets, Equipment Specifications, Cause & Effect Diagrams, control philosophies, shutdown philosophies, HAZOP Studies & reports, Operation & maintenance manuals etc. and providing necessary engineering inputs to the other disciplines and other departments.
  • To ensure proper division of work & responsibility among the process engineers, providing proper guidance & integration of work done, ensuring good, positive & healthy working nature among the team of engineers to ensure optimum productivity & effciency.
  • Preparation & Issue of RFQ’s, evaluation of vendor’s quotations, clarifications, Technical Bid Analysis etc.
  • Review of vendor’s documents, drawings, datasheets, specifications and calculations.
  • Ensuring planned engineering (process) progress with respect to the engineering deliverables for Tenders (as required) and awarded Projects, process engineering planning & scheduling, preparation of progress reports, manpower & resource forecasts, time schedules of engineers, utilization of resources effectively & efficiently.
  • Process Design & Detail Engineering including performing process simulations, design calculations, Process Optimization, sizing & selection of equipment etc. for Tenders (as required) and for awarded Projects. Review of Clients tender documents, specifications, datasheets, verification of FEED design & calculations.
  • Preparation of various engineering deliverables (Drawings & Documents) such as Process Flow Diagrams, P & I Diagrams, Process Datasheets, Equipment Specifications, Cause & Effect Diagrams, control philosophies, shutdown philosophies, HAZOP Studies & reports, Operation & maintenance manuals etc. and providing necessary engineering inputs to the other disciplines and other departments.
  • To ensure proper division of work & responsibility among the process engineers, providing proper guidance & integration of work done, ensuring good, positive & healthy working nature among the team of engineers to ensure optimum productivity & effciency.
  • Preparation & Issue of RFQ’s, evaluation of vendor’s quotations, clarifcations, Technical Bid Analysis etc.
  • Review of vendor’s documents, drawings, datasheets, specifications and calculations.
  • Generate both Equipment and Piping General Arrangement drawings, making corrections as required.
  • Generate and Review Piping Isometrics, Pipe Support Drawings, Plot Plans, Overall Key Plan, based on details provided on PEFS (P&ID) as well as relevant Codes and Standards.
  • Generate and Review shop fabrication drawings for compliance with relevant codes and standards and forecast reports and other associated documentation to Lead Engineer for reviews and or correction.
  • Good knowledge of engineering design codes like, ASME, API, ANSI, ASTM, NFPA, BS, TEMA & and standards like Shell DEP, Total GS, Mobil GP, Chevron CES, etc.
  • Participate in Design Reviews, 3D Model, HAZOP, HAZID and constructability reviews.
  • Review of vendor’s documents, drawings, datasheets, and specifications.
  • Review and update all deliverables issued to clients to ensure they meet and/or exceed clients’ expectations at all times.
  • Ensure participation in all QHSSE programmes.
  • Interface and communicate with other departments to achieve project goals
  • Deputize for the lead engineer in his/her absence.
  • Intervene and/or report unsafe acts / conditions and near misses
Qualification & Experience
  • A relevant Engineering Degree or equivalent.
  • Hands on experience in software such as AutoCAD, Caesar II, Auto Pipe, PV-Elite, PDMS, Auto PLANT, HTRI.
  • Must be familiar with Microsoft Office especially Excel, Access & Word and other applicable software.
  • Strong organizational skills, technical competence and attention to details.
  • At least ten (10) years of progressive experience in design and facilities engineering both Onshore and Offshore, Green and Brown fields in the oil and gas industry.
  • Field engineering and construction experience is an asset.
  • Competent oral (English) and written communication skills
  • Knowledge of industry/regulatory standards
  • Proficiency in reading and understanding technical drawings/diagrams
  • Develop, mentor and coach junior engineers.
  • Management techniques and delegation of tasks
  • Inter Personal skills communication and effective listening
  • Leadership skill and ability to supervise and check the work of others successfully.
  • Thorough document review, decision-making and time management skills
    Job Title: Pipeline Designer Location: Lagos Duties and Responsibilities
  • Prepare and update Overall Pipeline route Drawings, Route Proposal Drawings, Alignment Sheets / Approach Drawings, Bulk Material Take-Offs.
  • Generate Pipeline Isometrics.
  • Prepare shop fabrication drawings for compliance with relevant codes and standards and forecast reports and other associated documentation.
  • Prepare specifications and equipment datasheets for line pipe, pumps, valves and tanks based on details provided on PEFS (P&ID) as well as relevant Codes and Standards.
  • Isometric checking against P&ID, Specifications, Line Attributes and Bill of Materials.
  • Good knowledge of engineering design codes like, ASME, API, ANSI, ASTM, NFPA, BS, TEMA & and standards like Shell DEP, Total GS, Mobil GP, Chevron CES, etc.
  • Participate in Design Reviews, 3D Model, HAZOP, HAZID and constructability reviews.
  • Review of vendor’s calculations, reports, drawings, datasheets, specifications and calculations.
  • To ensure deliverables are issued to meet the set targets.
  • Ensure participation in all QHSSE programmes.
  • Interface and communicate with other departments to achieve project goals
  • Intervene and/or report unsafe acts / conditions and near misses.
Qualification & Experience
  • A relevant Engineering degree or equivalent.
  • Hands on experience in software such as AutoCAD, Caesar II, Auto Pipe, PV-Elite, PDMS, Auto PLANT.
  • Must be familiar with Microsoft Office especially Excel, Access & Word and other applicable software.
  • Strong organizational skills, technical competence and attention to details.
  • At least eight (8) years of progressive experience in design and facilities engineering both Onshore and Offshore, Green and Brown fields in the oil and gas industry
  • Field engineering and construction experience is an asset.
  • Competent oral (English) and written communication skills
  • Knowledge of industry/regulatory standards
  • Proficiency in reading and understanding technical drawings/diagrams
  • Inter Personal skills communication and effective listening
  • Leadership skill and ability to supervise and check the work of others successfully.
    Job Title: Senior Mech/Piping Engineer Location: Lagos Duties and Responsibilities
  • Ensuring planned engineering (process) progress with respect to the engineering deliverables for Tenders (as required) and awarded Projects, process engineering planning & scheduling, preparation of progress reports, manpower & resource forecasts, schedules of engineers, utilization of resources effectively and efficiency
  • Process Design & Detail Engineering including performing process simulations, design calculations,
  • Process Optimization, sizing & selection of equipment etc. for Tenders (as required) and for awarded Projects.
  • Review of Clients tender documents, specifications, datasheets, verification of FEED design & calculations.
  • Preparation of various engineering deliverables (Drawings & Documents) such as Process Flow
  • Diagrams, P & I Diagrams, Process Datasheets, Equipment Specifications, Cause & Effect Diagrams, control philosophies, shutdown philosophies, HAZOP Studies & reports, Operation & maintenance manuals etc. and providing necessary engineering inputs to the other disciplines and other departments.
  • To ensure proper division of work & responsibility among the process engineers, providing proper guidance & integration of work done, ensuring good, positive & healthy working nature among the team of engineers to ensure optimum productivity & efficiency.
  • Preparation & Issue of RFQ’s, evaluation of vendor’s quotations, clarifications, Technical Bid Analysis etc.
  • Review of vendor’s documents, drawings, datasheets, specifications and calculations.
  • Ensuring planned engineering (process) progress with respect to the engineering deliverables for Tenders (as required) and awarded Projects, process engineering planning & scheduling, preparation of progress reports, manpower & resource forecasts, time schedules of engineers, utilization of resources effectively & efficiently.
  • Process Design & Detail Engineering including performing process simulations, design calculations, Process Optimization, sizing & selection of equipment etc. for Tenders (as required) and for awarded Projects. Review of Clients tender documents, specifications, datasheets, verification of FEED design & calculations.
  • Preparation of various engineering deliverables (Drawings & Documents) such as Process Flow Diagrams, P & I Diagrams, Process Datasheets, Equipment Specifications, Cause & Effect Diagrams, control philosophies, shutdown philosophies, HAZOP Studies & reports, Operation & maintenance manuals etc. and providing necessary engineering inputs to the other disciplines and other departments.
  • To ensure proper division of work & responsibility among the process engineers, providing proper guidance & integration of work done, ensuring good, positive & healthy working nature among the team of engineers to ensure optimum productivity & efficiency.
  • Preparation & Issue of RFQ’s, evaluation of vendor’s quotations, clarifications, Technical Bid Analysis etc.
  • Review of vendor’s documents, drawings, datasheets, specifications and calculations.
  • Prepare and Review General Arrangement drawings, making corrections as required.
  • Prepare and Review Piping Isometrics, make corrections where necessary.
  • Review shop fabrication drawings for compliance with relevant codes and standards and forecast reports and other associated documentations.
  • Prepare equipment datasheets based on details provided on PEFS (P&ID) as well as relevant Codes and Standards.
  • To ensure proper division of work & responsibility among the mechanical / piping engineers and designers, providing proper guidance & integration of work done, ensuring good, positive & healthy working nature among the team of engineers to ensure optimum productivity & efficiency.
  • Preparation & Issue of Scope of work (input to RFQ), evaluation of vendor’s quotations, clarifications, Technical Bid Analysis etc.
  • Good knowledge of engineering design codes like, ASME, API, ANSI, ASTM, NFPA, BS, TEMA & and standards like Shell DEP, Total GS, Mobil GP, Chevron CES, etc.
  • Participate in Design Reviews, 3D Model, HAZOP, HAZID and constructibility reviews.
  • Review of vendor’s documents, calculations, reports, drawings, datasheets, specifications and calculations.
  • To ensure deliverables are issued to meet the set targets.
  • Review and update all deliverables issued to clients to ensure they meet and/or exceed clients’ expectations at all times.
  • Ensure participation in all QHSSE programmes.
  • Interface and communicate with other departments to achieve project goals
  • Deputize for the lead engineer in his/her absence.
  • Intervene and/or report unsafe acts / conditions and near misses
Qualifications & Experience
  • A relevant engineering degree or equivalent.
  • Hands on experience in software such as AutoCAD, Caesar II, Auto Pipe, PV-Elite, PDMS, Auto PLANT, HTRI.
  • Must be familiar with Microsoft Office especially Excel, Access & Word and other applicable software.
  • Strong organizational skills, technical competence and attention to details.
  • At least ten (10) years of progressive experience in design and facilities engineering both Onshore and Offshore, Green and Brown fields in the oil and gas industry
  • Field engineering and construction experience is an asset.
  • Competent oral (English) and written communication skills
  • Knowledge of industry/regulatory standards
  • Proficiency in reading and understanding technical drawings/diagrams
  • Develop, mentor and coach junior engineers.
  • Management techniques and delegation of tasks
  • Inter Personal skills communication and effective listening
  • Leadership skill and ability to supervise and check the work of others successfully.
  • Thorough document review, decision-making and time management skills
     
How to Apply Interested and qualified candidates should send their CV to: [email protected]
Application Deadline 9th May, 2019.
Note: Only shortlisted candidates will be contacted.