Jobs

Kimberly-Clark Job Recruitment


Kimberly-Clark and its well-known global brands are an indispensable part of life for people in more than 150 countries. Every day, 1.3 billion people - nearly a quarter of the world's population - trust K-C brands and the solutions they provide to enhance their health, hygiene, and well-being. With brands such as Kleenex, Scott, Huggies, Pull-Ups, Kotex, and Depend, Kimberly-Clark holds No.1 or No. 2 share positions in more than 80 countries.
We are recruiting to fill the positions below:   Job Title: Shift Electrical Technician Ref Id: 804078 Location: Nigeria - Lagos Worker Type: Employee Worker Sub-Type: Regular Job Type: Full time
Job Description Safety:
  • Ensure compliance to all departmental and plant safety rules and regulations.  All non-conformances should be dealt with immediately all unresolved issues must be raised with Asset Leader.  Follow the correct WI/WP and Process Instruction for all tasks performed. Carry out continual development of process optimization to ensure safety.
Productivity:
  • Work with change over’s on the asset in order to minimise change over delay
  • To continuously work on improvement plans to upgrade/improve the asset performance and capability.
  • Ensure all documentation, including drive and PLC data is recorded properly and systematically to provide optimum reliability of the asset.
  • To support production within the diaper operation by providing electrical technical support to the production teams.
  • To carry out action plans as directed in order to solve problems thereby minimizing electrical delay.
  • Analyse electrical delay and together with Day Electrical Technician resolve problems from electrical/electronic nature to ensure minimum delay.
Maintenance:
  • Recommend spares requirements to the Electrical Engineer.
  • Provide technical information to maintenance teams detailing work requests for planned and reactive maintenance
  • To participate in maintenance activities on all electrical equipment and installation.
  • To ensure that electrical spares are available and ready for use when required.
  • To provide assistance with standardisation, recommendation of changes in maintenance policies, fault finding and problem solving.
Housekeeping:
  • Maintain 5S housekeeping principles in the department at all times, including all equipment and surrounds.  Ensure all unused items are removed from the operating area and stored correctly.
Qualifications  
  • Prior high-speed production machine maintenance or operating experience, especially on Diaper machines will be advantageous.
  • PC Literate
  • Higher National Diploma (HND) or equivalent in Electrical Engineering
  • Minimum 5 years’ experience on high-speed production equipment, of which at least 3 years must be process experience.
   
 
Job Title: Technical Stores Operator Job ID: 803103 Location: Lagos, Nigeria Time Type: Full time Worker Type: Employee Worker Sub-Type: Regular
Job Descriptions
  • Check MB51 report to confirm correct capturing of invoices/material requests
  • Review internal controls procedures when required.
  • Scrutinize dispatch notes for stock and non-stock send out for repairs / replacement.  Follow up with end users for PR  /PO numbers.  Close of document once item is returned
  • Report back to Engineering Manager on a monthly basis regarding out of stock issues (Complete a document for each incident and attach relevant communication and corrective action taken).  This includes the MB51 checks and issues picked up with MR/Invoices
  • Do 5 daily spot checks on stock delivered – Report to Engineering Manager monthly.
  • Do a regular checks on material request to confirm bin cards are updated (Use MR’s submitted with MB51) – Report to Engineering Manager monthly
  • Attend weekly meetings regarding: Safety & Housekeeping / HR issues / Cycle counts / Receiving / Out of stock issues / General
  • Promptly processing of customer requests to amend item descriptions, review stock levels & timeout ordering of additional materials for shutdown purposes.
  • Stock transfers via Transaction SAP code from duplicated items & subsequent request to OTS Europe to delete items.
  • Review customer request for re-instatement of items and subsequent communication to OTS to De-flag.
  • Scrutinizing material Records for duplicate records, incorrect base units of measure, incomplete description & incorrect material types.
  • Process request for re-classification of items e.g. Standard spares to reparable item and forward to Store leader for loading.
  • Arrange the de-flagging of items to enable processing of corrections required by casting, followed by requesting deletion.
  • Routing all material master amendments to Store Leader for capturing.
  • Verifying entries on SAP to ensure accuracy.
  • Daily stock records & reporting
  • Maintain SAP records by updating bin allocations / part numbers / descriptions / min & max levels
  • Assist team members with queries.
  • Receive goods when required.
Global VISA and Relocation Specifications:
  • A role in the new Mill
     
Job Title: Laboratory Technician Ref Id: 804080 Location: Nigeria - Lagos Worker Type: Employee Worker Sub-Type: Regular Job Type: Full time
Job Description Perform work in a safe manner.
  • Participate in providing quality training to the Operations crew on product quality.
  • Communicate quality systems changes, trials/waiver activity, specification updates and concerns to crew members.
  • Compiling of shift quality reports and accumulating quality statistical data.
  • Maintain and calibrate quality testing equipment and instruments as per schedule and report any defective instrumentation to the Quality Leader Specialist.
  • Support execution of Quality protocols and Trial activity.
  • Adherence to KC Safe Work Practices, Good Laboratory Practices, LEAN Manufacturing Principles and maintain Housekeeping Standards.
  • Ensure QA records of retained samples are properly maintained.
  • Support quality leader specialist with entrenching quality mind-set and ensuring process improvement
  • Share expertise and knowledge of product quality and the consumer impact with operation's crews.
  • Provide accurate, real-time audits of plant inspection and testing results to identify and correct quality deficiencies on shift.
  • Review documentation and determine disposition of key raw materials.
  • Provide timely, effective communication of quality system changes, updates and concerns to operation crew members.
  • Assist with troubleshoot PASS related software issues.
  • Provide Operations with testing, inspection and general machine support as needed to meet quality objectives.
  • Complete documentation for held or rejected finished product and raw material and ensure held and rejected material are clearly labelled for traceability and inform the Quality Leader Specialist.
  • Coordinate on shift re-work of held finished product according to procedures.
  • Monitor and identify crew specific quality development needs and communicate this to the Quality Leader Specialist.
Qualification
  • Experience in ISO 9001 standards.
  • Computer Literacy.
  • Good communication, statistical and analytical skills.
  • Higher National Diploma or Bachelor’s Degree in Science and Lab Tech, Chemistry, Food Science, Microbiology, or related field and 1-2 years quality experience in FMCG environment as a Quality Control Inspector
     
Job Title: Forklift Driver Job ID: 804212 Location: Lagos, Nigeria Time Type: Full time Worker Type: Employee Worker Sub-Type: Regular
Job Description
  • Move finished goods from production departments to finished goods warehouse
  • Record production through scanning and recording of products.
  • Support daily, weekly, monthly, and annual stock counts
  • Maintain and report any faults on fork trucks
  • Maintain good safety, housekeeping, storage and stacking standards in working area.
  • Pick materials, as per material requisitions, from raw material warehouse and move the stock to the allocated areas in the various production departments.
  • Return all unused materials back to the raw material warehouse.
  • Ensures that all pallets of Finished Goods are neatly stretch wrapped.
Qualifications
  • National Diploma or Trade test III with a minimum of one year experience in a FMCG raw material warehouse.
  • Valid forklift driver license with one-year practical driving experience.
Global VISA and Relocation Specifications:
  • A role in the new mill. It is open to all eligible citizens of Nigeria.
   
 
Job Title: Waste Room Operator (Central System)-4 Ref Id: 804086 Location: Nigeria - Lagos Worker Type: Employee Worker Sub-Type: Regular Job Type: Full time
Job Description
  • Ensure all bales conform to agreed standards of compression and bales are of good quality
  • Manually load all other diaper waste into the Baler.
  • Operate stretch wrap machine and ensure all bales are properly wrapped.
  • Remove all bales to designated storage area by means of clamp truck.
  • Knows and actively participate in all work and repairs which are carried out in his/her sector by the support teams
  • Reports and informs team leader of the maintenance and improvement required of his sector.
  • During shift changes, communicates to the incoming operator all new occurrences, repairs, process changes and materials issues.
  • Informs team leader when waste bins require emptying.
  • Complies with all safety rules, procedures and works instructions applicable to area of responsibility.
  • Maintains a high standard of housekeeping and hygiene in the entire Central Systems area, waste canopy and waste bin area and follow 5S Housekeeping principles.
  • Checks that consumables that enter his/her sector correspond with the requirements of the product being disposed.
  • Ensure efficient operations of the Diaper Cull, Trim Balers and the Briquetter
  • Ensure Balers are set at agreed setting and ensure basic maintenance tasks and check sheets are done.
Qualifications
  • Prior high-speed production machine maintenance or operating experience, especially on Diaper machines will be advantageous.
  • Forklift Driver Licence or the ability to acquire licence within 3 months
  • National Diploma ND or equivalent qualification in Mechanical or Electrical Engineering
  • Minimum of 3 years’ experience on high-speed production equipment, of which at least 2 years must be process experience.
     
Job Title: Niche Technician, Packaging Ref Id: 803949 Location: Nigeria - Lagos Worker Type: Employee Worker Sub-Type: Regular Job Type: Full time
Job Description
  • Perform modular process health checks in-line with center-lining guidelines.
  • To analyze breakdowns and failures, downtime, reliability of equipment, identify problem nodes, if possible, to eliminate inconsistencies.
  • Compile all area issues and reasons for stops and provide a proper update at the support meeting
  • Lead and actively participate in all work and repairs which are carried out in FCO section by the support teams
  • Initiate and ensure proper maintenance and improvement of area equipment.
  • Adjust the schedule of planned maintenance in the event of an emergency equipment failure and investigate the incident with a precautionary plan.
  • Ensure equipment and area centre-line is maintained at all times
  • Timely provide update on the changes and improvements made to operating teams and shift technicians
  • To provide clarifications and training for operators and contractors on how to carry out work and operation of equipment safely, and to carry out repairs.
  • Lead changeover activities of area equipment and ensure work is completed without rework.
  • Complies with all safety rules, procedures and works instructions.
  • Maintain a high standard of housekeeping and hygiene in the department and follow 5S Housekeeping principles.
  • Ensures that area equipment are in base condition and runs to deliver target area results in terms of stops, breakdowns and downtime.
  • Develop troubleshooting guide for Packaging area equipment
  • Develop work instructions for area equipment and units
  • Ensures area process audit is done and properly documented
  • Report PA outages and follow up with the process engineer and process specialist to close out all outages.
  • Communicate best operating practice across all shift
  • Lead the trouble shooting and problem solving on all modules in this section.
  • Build the capability of area operators through regular coaching.
  • To monitor the availability of spare parts in the warehouse and, if no specific parts are found, immediately notify the mechanical engineer
Qualifications
  • Prior high-speed production machine maintenance or operating experience, especially on Diaper machines will be advantageous
  • Computer Literate
  • Higher National Diploma HND in Mechanical or Industrial Engineering.
  • Minimum of 5 years’ experience on high-speed production equipment.
     
Job Title: Shift Mechanical Technician Job ID: 803995 Location: Lagos Time Type: Full time Worker Sub-Type: Regular
Job Descriptions Safety:
  • Carries out continual development of process optimization to ensure safety.
  • Ensures compliance to all departmental and plant safety rules and regulations.  All non-conformances should be dealt with immediately all unresolved issues must be raised with Asset Leader. Follow the correct WI and Process Instruction for all tasks performed.
Productivity:
  • Carries out mechanical changes during product and tier changes on the asset in order to minimise change over delay
  • Works on continuous improvement plans to upgrade/improve the asset performance and capability.
  • Ensure all documentation are recorded properly and systematically to provide optimum reliability of the asset.
  • Supports production within the diaper operation by providing mechanical support to the production teams.
  • Carries out action plans as directed in order to solve problems thereby minimizing mechanical delay.
  • Analyses mechanical delay and together with the Day Mechanical Technician resolve problems of a mechanical nature to ensure minimum delay.
Maintenance:
  • To ensure equipment standardisation, recommendation of changes in maintenance policies, fault finding and problem solving.
  • Recommend spares requirements to the Mechanical Engineer and Asset Leader to ensure that mechanical spares are available and ready for use when required.
  • Provide technical information to maintenance teams detailing work requests for planned and reactive maintenance
  • Carry out condition monitoring inspection on equipment and replacing of all wearing parts in accordance with the relevant PM schedules.
  • To carry out preventive maintenance activities on all mechanical equipment and installation.
Projects:
  • Assists in plant project formulation
  • Provides mechanical support during projects in the plant.
Housekeeping:
  • Maintain 5S housekeeping principles in the department at all times, including all equipment and surrounds.  Ensure all unused items are removed from the operating area and stored correctly.
Qualifications
  • Prior high-speed production machine maintenance or operating experience, especially on Diaper machines will be advantageous.
  • PC Literate
  • Higher National Diploma HND or equivalent in  Mechanical Engineering
  • Minimum 5 years’ experience on high-speed production equipment, of which at least 3 years must be process experience.
Global VISA and Relocation Specifications:
  • A role in the new mill.  It is open to all eligible citizens of Nigeria
     
Job Title: Niche Technician (Fluff) Location: Lagos Worker Type: Employee Worker Sub-Type: Regular Time Type: Full time
Job Description
  • To monitor the availability of spare parts in the warehouse and, if no specific parts are found, immediately notify the mechanical engineer
  • Perform modular process health checks in-line with center-lining guidelines.
  • To analyze breakdowns and failures, downtime, reliability of equipment, identify problem nodes, if possible, to eliminate inconsistencies.
  • Compile all area issues and reasons for stops and provide a proper update at the support meeting
  • Lead and actively participate in all work and repairs which are carried out in FCO section by the support teams
  • Initiate and ensure proper maintenance and improvement of area equipment.
  • Adjust the schedule of planned maintenance in the event of an emergency equipment failure and investigate the incident with a precautionary plan.
  • Ensure equipment and area centreline is maintained at all times
  • Timely provide update on the changes and improvements made to operating teams and shift technicians
  • To provide clarifications and training for operators and contractors on how to carry out work and operation of equipment safely, and to carry out repairs.
  • Lead changeover activities of area equipment and ensure work is completed without rework.
  • Complies with all safety rules, procedures and works instructions.
  • Maintain a high standard of housekeeping and hygiene in the department and follow 5S Housekeeping principles.
  • Ensures that area equipment are in base condition and runs to deliver target area results in terms of stops, breakdowns and downtime.
  • Develop troubleshooting guide for Fluff area equipment
  • Develop work instructions for area equipment and units
  • Ensures area process audit is done and properly documented
  • Report PA outages and follow up with the process engineer and process specialist to close out all outages.
  • Communicate best operating practice across all shift
  • Lead the troubleshooting and problem solving on all modules in this section.
  • Build the capability of area operators through regular coaching.
Qualifications
  • Prior high-speed production machine maintenance or operating experience, especially on Diaper machines will be advantageous.
  • Computer Literate.
  • Higher National Diploma (HND) in Mechanical or Industrial Engineering.
  • Minimum of 5 years experience on high-speed production equipment.
Global VISA and Relocation Specifications:
  • A new role in the mill
  • It is open to all eligible citizens of Nigeria.
     
Job Title: Receiving Clerk Ref Id: 803886 Location: Nigeria -Lagos Job Type: Full time Worker Type: Employee Worker Sub-Type: Regular
Job Description
  • Communicate materials received to all interfaces involved
  • Update all reconciliation of all material usage
  • Liaise with administrative staff, production floor members, team leaders, managers and external customers.
  • Adhere to safety and housekeeping policies / procedures.
  • Provide training to new staff members if requested
  • Receives and checks all goods and materials as per supplier’s delivery note and carry out all documentations required.
  • Generate material documents by entering received goods into SAP/ERP.
  • Carry out cycle counts on all inventory items.
  • Forward receiving documents to Functional Buyer.
  • Coordinating the offloading of goods and materials from delivery vehicles.
Qualifications
  • Knowledge of SAP and good telephone and general communication skills.
  • 2-3 Years’ experience in materials handling and receiving.
  • National Diploma (ND) in either Statistic, Mathematics or any Engineering field.
  • PC Literate,
Global VISA and Relocation Specifications:
  • A role in the new mill.
     
Job Title: Forklift Driver - Receiving Day Ref Id: 804069 Location: Nigeria -Lagos Job Type: Full time Worker Type: Employee Worker Sub-Type: Regular
Job Description
  • Move finished goods from production departments to finished goods warehouse
  • Record production through scanning and recording of products.
  • Support daily, weekly, monthly, and annual stock counts
  • Maintain and report any faults on fork trucks
  • Maintain good safety, housekeeping, storage and stacking standards in working area.
  • Pick materials, as per material requisitions, from raw material warehouse and move the stock to the allocated areas in the various production departments.
  • Return all unused materials back to the raw material warehouse.
  • Ensures that all pallets of Finished Goods are neatly stretch wrapped.
Qualifications
  • Valid forklift driver license with one year practical driving experience.
  • National Diploma or Trade Test III with a minimum of one year experience in a FMCG raw material warehouse.
Global VISA and Relocation Specifications:
  • A role in the new mill. It is open to all eligible citizens of Nigeria.
     
Job Title: Inventory Officer (Raw Materials Warehouse) Location: Lagos Worker Type: Employee Worker Sub-Type: Regular Time Type: Full time
Job Description
  • Machine hour recording:
    • Enters machine hours provided by Operations into SAP
    • R/3 once a week (once a day)
  • Material Supply to operations:
    • Calls of raw materials,& finishing supplies form from Warehouse (Lagos DC) 4961 via STO in SAP to (Lagos Diaper Plant 4960)
  • Material returns
    • Returns materials back to the warehouse(4961) via an STO in SAP from Diaper plant (4960)
  • Production declaration:
    • Declares production in a timely manner based on information provided from operations
  • Material consumption:
    • Reviews backlushing error report (COGI) daily and solves errors in report (in collaboration with planning / operations / finance)
    • Does frequent material stock counts at shop floor and adjusts system stocks to match actual stocks
    • Reviews & analyses count differences and shares outcomes with Mill planning and operations to drive data & BOM accuracy
Qualifications
  • Computer skills (Excel, Word etc essential)
  • Basic SAP knowledge
  • National Diploma (ND) in either Commercial, Social Science, or Engineering Field.
  • Experience in Warehousing / Materials handling & management
Global VISA and Relocation Specifications:
  • A role in the new mill. It is open to all eligible citizens of Nigeria.
 
How to Apply Interested and qualified candidates should: Click here to apply