A rectangular coil of wire can rotate in a magnetic field. The ends of the coil are soldered to the two halves of a split ring. Two carbon brushes are made to press lightly against the split ring and when these are connected in circuit with a battery and rheostat, the coil rotates. This is a description of

Similar Questions

What is the energy stored in a 10μ F capacitor if the potential difference between the plates is 40...

An object of mass 80 kg is pulled on a horizontal rough ground by a force of 500 N. Find the coeffic...

What is the reading of the vernier calipers shown above ...

A cell of internal resistance 2 ohms supplies current to a 6 ohms resistor. The efficiency of the ce...

The small droplet of water that forms on the grass in the early hours of the morning is ...

A man hears his echo from a nearby hill 2s after he shouted. If the frequency of his voice is 260Hz ...

What volume of alcohol with a density of 8.4 x 102kgm-3 will have the same mass as 4.2m3of petrol wh...

loudness increases as a vibrating tuning fork is brought nearer the end of a pipe containing air col...

In a series R-L-C circuit, R = 10$\Omega$, $X_{c}$= 4$\Omega$ and $X_{L}$ = 9$\Omega$. The...

According to Pascal's principle, the pressure in a fluid is always? ...